Magneettiventtiili 100 PGA 1" 24VAC

Rain Bird
46,00€

Ominaisuudet

Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions  
Robust construction and electrical design for quiet performance you can count on  
Filtered pilot flow to resist debris and clogging  
Slow closing to prevent water hammer and subsequent system damage  
Normally closed, forward flow design Accepts latching solenoid for use with Rain Bird battery-operated controllers  
Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance  
Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller  
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service Three-year trade warranty  
Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance  
Accepts latching solenoid for use with Rain Bird battery-operated controllers
Options
Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance. Regulates up to 100 psi (6.9 bar)  
Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10,35 bar)  
Compatible with ESP-LXD decoders

Tiedot

Pressure: 1.04 to 10.4 bar)  
Flow without PRS-D option: 0.45 to 9.0 m3/h
Flow with PRS-D option: 1.14 to 9.0 m3/h
Water temperature: Up to 43° C  
Ambient temperature: Up to 52° C  
24VAC 50/60Hz (cycles/sec) solenoid power requirement  
Inrush current: 0.41A (9.9VA) at 50/60Hz  
Holding current: 0.14A (3.43VA) at 50/60Hz  
Solenoid coil resistance: 30-39 Ohms, nominal

Mitat

Korkeus  x Pituus  x Leveys
100-PGA: 7 1⁄4" (18.4 cm) x 5 1⁄2" (14.0 cm) x 3 1⁄4" (8.3 cm)  

Mallit

BSP w/ TBOS 9V Solenoidi  mallit
I-100-PGA-9V: 1”  BSP
BSP
I-100-PGA: 1”